Kid's Colored Christmas Ornament

AFFILIATE DISCLOSURE: This mail contains chapter links. Nosotros earn a small-scale commission from qualifying purchases.

Make these super fun Child's Colored Christmas Decoration with your Cricut and Infusible Ink Pens and Marker too every bit Cricut Blanks Coaster.

You tin can get the whole family involved in the fun of creating these custom Christmas Ornament.

Kid's Colored Christmas Decoration

These Kid'southward Colored Christmas Ornament brand great Christmas gifts for grandparents. All y'all have to do is enlist yous kids to help you color in the Cricut draw images. The imperfections are endearing and welcomed in this project.

You start the project by To make these super fun Christmas Coasters, you will need your Cricut and an Piece of cake Printing 2 or an Iron and a heat proof mat or an ironing board. Nosotros have the Cricut Maker, but you can besides make this project on the Cricut machines.

Start with a design you lot similar in Cricut Blueprint Infinite and run across if yous tin convert it to a describe file that works. I changed a few cut files that I like and some that I have used before for shirt into describe files using the drop down card.

Coloring Christmas Ornaments with the Kids

Once it is converted, you will demand to merge the colors of the files so that they are all the aforementioned color. This makes the depict file more like a coloring page for these coloring coasters.

The Cricut Infusible Ink Pens allows you to draw your own creations to infuse on to the Cricut blanks coasters. You can besides use the Cricut Infusible Ink Pens and markers to draw a file from Cricut Blueprint Space. It is pretty amazing when you think almost it.

In one case you have the image drawn for infusible pens on cardstock, y'all want to color in the blueprint with the Cricut Infusible Markers. This is where  you enlist the kids to aid you color in the Cricut drawn designs.

For the infusing part of the Cricut project, I would await until the kids go to bed because you will need extremely high heat of 400 degrees F.

We have and beloved the Cricut Easy Press 2 and an Easy Press Mat that makes doing these projects so much easier than trying to pull it off with an iron.

To make the infusible ink work, you will need butcher paper to go betwixt the infusible ink pattern and the Easy Printing two.

Some of it comes in the infusible ink transfer sheets, but not with the makers. I relieve scraps of the butcher paper for the infusible coaster projects. If you don't have butcher newspaper, you can use copy newspaper.

How to Make Hand Colored Ornaments?

Size your depict prototype based on the coaster size and make them smaller than the available space. The Cricut Infusible Ink Blanks Coasters come in foursquare and round. The circular blanks coasters are iii.6 in diameter.

Here is another projection using the round coastersand one with the foursquare coasters. Load the .iv black infusible ink pen into the Cricut Machine.Lay the card stock on a light grib mat. Side by side, load the carte du jour stock into the machine using the arrow push button.

The Cricut Machine will draw the blueprint. Brand sure to reverse the projection if you are printing word in the Cricut Design Space printing area. And so, colour in the designs in using the Cricut Infusible Ink Markers.

Side by side, we cut out the designs so that they would fit on to the coasters. Brand sure to cut off any parts of the paper that have stay marks from the pens on them. They volition also transfer with the design. I fabricated this mistake a few times.

How to Easy Press 2 to Make Kid's Colored Christmas Ornament?

Now, you volition need Cricut blanks coasters, Cricut Easy Press two, Piece of cake Press mat, butcher paper, heat resistant tape, and the colored card stock.Start heating the Easy Press 2 to 400 degrees F for 60 seconds.

Lay out the Cricut blanks coasters onto the Easy Press mat. The Cricut blanks are a must for this project as the infusible ink does not show up every bit well on other shirts. Buying Cricut Blanks ensures infusible ink compatibility.

Utilize a lint brush to go over the coaster to ensure the design will stick properly. Gear up the design on to coaster where you want it with the print facing down on superlative of the coaster.Utilise heat resistant tape to proceed the blueprint in place.Put the butcher paper on pinnacle of the design.

Next, put the Like shooting fish in a barrel Press 2 on elevation of the butcher newspaper with light pressure for 60 seconds. Do Not motility the Easy Press 2 as it volition mess upwards the blueprint.

Remove the Easy Printing ii and let the coaster absurd fully before removing the design or moving in any way. You tin can still mess upwards the blueprint.

Then, peel away the tape and pull up the pattern to reveal the vibrant colors of the infused ink! Repeat steps for the residual of the drawn designs.

How to Brand a Coaster into an Ornament?

To plow the coaster into a Christmas ornament, cut a four inch length of ribbon or yarn.

Fold the ribbon in half and tie it in a knot. Add a dot of hot gum to the back of the coaster and glued the ribbon or yarn on.

Add glue to the back of the yarn or ribbon to seal it in.

Let the glue dry for 24 hours before hanging.

Then, you are set to pack upwards your ornaments for gift or put them straight on your Christmas tree.

Materials

• Cricut Infusible Ink Blanks Coasters
• Basic White Bill of fare Stock
• Cricut Infusible Ink Pens
• Butcher Paper
• Cricut Infusible Ink Markers
• Heat Resistant Tape
• Yarn or Ribbon
• Hot Mucilage

Tools

• Cricut
• Easy Press Mat
• Cricut Easypress ii
• Lint Castor
• Light Grip Mat
• Mucilage Gun
• Scissors

Instructions

Choose the images you want to put on the ornaments.

Alter information technology to a draw file.

And so, size your draw image based on the coaster size and make them smaller than the bachelor space. The circular blanks coasters are 3.vi in diameter.

Load the .iv blackness infusible ink pen into the Cricut Machine.

Lay the card stock on a light grib mat.

Side by side, load the card stock into the machine using the arrows.

The Cricut Automobile volition depict the design. Make sure to reverse the project if y'all are printing discussion in the Cricut Design Space printing area.

Then, color in the designs in using the Cricut Infusible Ink Markers.

Adjacent, we cut out the designs so that they would fit on to the coasters.

Now, you will need Cricut blanks coasters, Cricut Easy Press 2, Piece of cake Press mat, butcher paper, heat resistant record, and the colored card stock.

Offset heating the Easy Press ii to 400 degrees F for 60 seconds.

Lay out the Cricut blanks coasters onto the Easy Press mat. The Cricut blanks are a must for this projection equally the infusible ink does non evidence upwardly as well on other shirts. Ownership Cricut Blanks ensures infusible ink compatibility.

Use a lint brush to go over the coaster to ensure the design volition stick properly.

Set the design on to coaster where you want it with the print facing down on peak of the coaster.

Apply heat resistant tape to keep the design in identify.

Put the butcher paper on acme of the pattern.

Next, put the Easy Press ii on top of the butcher paper with light pressure for 60 seconds.

Practice NOT move the Easy Press 2 as it will mess upwards the design.

Remove the Like shooting fish in a barrel Press 2 and let the coaster cool fully before removing the design or moving in whatever style. You can yet mess upwards the design.

And so, pare away the record and pull upwardly the blueprint to reveal the vibrant colors of the infused ink!

Repeat steps for the rest of the drawn designs.

To turn the coaster into a Christmas ornament, cut a 4 inch length of ribbon or yarn.

Fold the ribbon in half and tie it in a knot.

Add together a dot of hot glue to the back of the coaster and glued the ribbon or yarn on.

Add together glue to the back of the yarn or ribbon to seal it in.

Let the mucilage dry for 24 hours earlier hanging.

Then, you lot are ready to pack up your ornaments for gift or put them straight on your Christmas tree.

More Infusible Ink Cricut Projects

If yous honey this Kid's Colored Christmas Ornament, y'all will love these other Cricut Infusible Ink Projects.

• DIY Christmas Coasters
• Personalized Christmas Shirts

dedmonthateld.blogspot.com

Source: https://aprilgolightly.com/kids-colored-christmas-ornament/